HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual page 291

Examples The following is an example of the snmpv3user add command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> snmpv3user add
A list of SNMPV3 user attributes with formatting and default values as
applicable will follow.
Enter a new value OR simply press the ENTER key where-ever allowed to
accept the default value.
If you wish to terminate this process before reaching the end of the
list,
press "q" or "Q" and the ENTER OR "Ctrl-C" key to do so.
Username
Group
Authentication
AuthType
AuthPhrase
Confirm AuthPhrase
Privacy
PrivType
PrivPhrase
Confirm PrivPhrase
Do you want to save and activate this snmpv3user setup ?
SNMPV3 user added and activated.
The following is an example of the snmpv3user delete command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> snmpv3user delete snmpuser1
The user account will be deleted. Please confirm (y/n): [n] y
SNMPV3 user deleted.
The following is an example of the snmpv3user edit command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> snmpv3user edit
A list of SNMPV3 user attributes with formatting and current attribute
values for the specified SNMPV3 user will follow.
Enter a new value OR simply press the ENTER key where-ever allowed to
accept the current value.
If you wish to terminate this process before reaching the end of the
list,
press "q" or "Q" and the ENTER OR "Ctrl-C" key to do so.
Username
Group
Authentication
Do you want to save and activate this setup ?
SNMPV3 user account edited and activated.
(8-32 chars)
(0=ReadOnly, 1=ReadWrite) [ReadOnly
(True/False)
(1=MD5, 2=SHA)
(8-32 chars)
(True/False)
(1=DES)
(8-32 chars)
(8-32 chars)
(0=ReadOnly, 1=ReadWrite) [ReadWrite ] : 1
(True/False)
8/20q Fibre Channel Switch command line interface guide 291
: snmpuser1
] : 1
[False ] : t
[MD5 ] : 1
: ***********
: ***********
[False ] : t
[DES ] : 1
: ********
: ********
(y/n): [n] y
: snmpuser1
[True ] : f
(y/n): [n] y