Show Port - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

show port

Description Displays operational information for one or more ports.
Authority None
Syntax
show port
Table 65 describes the information returned by the show port command.
Table 65 Show port display entries
Parameter
AdminState
AIinit
AIinitError
AsicNumber
AsicPort
BadFrames
BBCR_FrameFailures
BBCR_RRDYFailures
ClassXFramesIn
ClassXFramesOut
ClassXWordsIn
ClassXWordsOut
ClassXToss
ConfigType
DecodeError
POSTFaultCode
POSTStatus
DownstreamISL
EpConnects
EpConnState
EpIsoReason
FBusy
Description
Administrative state
Number of times the port begins arbitrated loop initialization
Number of times the port entered initialization and the initialization
failed
Application-specific integrated circuit (ASIC) number
ASIC port number
Number of frames that have framing errors.
Number of times more frames were lost during a credit recovery period
than the recovery process could resolve. This causes a Link Reset to
recover the credits.
Number of times more Receiver_Ready (R_RDY) primitives were lost
during a credit recovery period than the recovery process could resolve.
This causes a Link Reset to recover the credits.
Number of class x frames received by this port
Number of class x frames sent by this port
Number of class x words received by this port
Number of class x words sent by this port
Number of times an SOFi3 or SOFn3 frame is tossed
Configured port type: G, GL, F, FL, TR, or Donor
Number of decode errors detected
Fault code from the most recent power-on self test
Status from the most recent power-on self test
Downstream ISL state. True indicates a connection to another switch
that is not the principal switch.
Number of times an E_Port connected through ISL negotiation
E_Port connection status
E_Port isolation reason
Number of times the switch sent a fabric busy (F_BSY) frame because
the Class 2 frame could not be delivered within ED_TOV time; or the
number of class 2 and class 3 F_BSY frames generated by this port in
response to incoming frames. This usually indicates a busy condition on
the fabric or N_Port that is preventing delivery of this frame.
8/20q Fibre Channel Switch command line interface guide 265