Set Log; Component Event Monitoring Filter Parameters - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

set log

Description Specifies the events to record in the event log and display on the screen. You determine what events
to record in the switch event log using the component, level, and port operands. You determine
what events are automatically displayed on the screen using the display operand. Alarms are
always displayed on the screen.
Authority Admin session
Syntax
set log
archive
clear
component [filter_list]
display [filter]
level [filter]
port [port_list]
restore
save
start (default)
stop
Operands
archive
Collects all log entries and stores the result in new file named logfile that is maintained in
switch memory where it can be downloaded using FTP. To download logfile, open an FTP
session, log in with account name/password of images for both, and type get logfile.
clear
Clears all log entries.
component [filter_list]
Specifies one or more components given by [filter_list] to monitor for events. A component is a
firmware module that is responsible for a particular portion of switch operation. Use a <space>
to delimit values in the list.
Table 40
Parameter
All
Eport
Mgmtserver
Nameserver
None
Port
Qfs
Snmp
Switch
Zoning
display [filter]
Specifies the log events to automatically display on the screen according to the event severity
levels given by [filter].
Table 40

Component event monitoring filter parameters

Description
Monitors all components. To maintain optimal switch performance, do not use
this setting with the level operand set to info.
Monitors all E_Ports
Monitors management server status
Monitors name server status
Monitor none of the component events
Monitors all port events
Monitors Call Home service events
Monitors all SNMP events
Monitors switch management events
Monitors zoning conflict events
Table 41
describes the component event monitoring filter parameters.
describes the event display filter parameters.
8/20q Fibre Channel Switch command line interface guide 211