Network Configuration; Displaying The Network Configuration - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

3

Network configuration

Network configuration consists of the IP parameters that identify the switch in the network and provide for
IP security.
This section describes the following network configuration tasks:
• Displaying the network
• Configuring the Ethernet
• Verifying a switch in the
• Managing IP

Displaying the network configuration

The show fabric command displays IP addresses (Enet IP Addr) for all switches in the fabric, as
shown in the following example.
8/20q FC Switch #> show fabric
Domain
WWN
SymbolicName
HostName
EthIPv4Address
EthIPv6Address
* indicates principal switch
The show setup system command displays the entire switch network configuration, which includes the
following:
• IP configurations (versions 4 and 6)
• DNS server configuration
To display specific information, add the corresponding keyword. For example, to display IPv6
configuration information, enter the show setup system ipv6 command:
8/20q FC Switch #> show setup system ipv6
System Information
------------------
EthIPv6NetworkEnable
EthIPv6NetworkDiscovery
EthIPv6NetworkAddress
EthIPv6GatewayAddress
configuration, page 25
port, page 26
network, page 28
security, page 29
*133(0x85)
10:00:00:c0:dd:0d:53:91
8/20q FC Switch
<undefined>
10.20.116.133
<undefined>
False
Static
2001::1/64
fe80::1
8/20q Fibre Channel Switch command line interface guide 25