Zoning Clear - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

Fibre channel switch
Hide thumbs Also See for AK241A - StorageWorks 8Gb Simple SAN Connection:
Table of Contents

Advertisement

zoning clear

Description Clears all inactive zone sets from the volatile edit copy of the zoning database. This operand
requires a zoning edit session. This operand does not affect the non-volatile zoning database.
However, if you enter the zoning clear command followed by the zoning save command, the
non-volatile zoning database will be cleared from the switch.
TIP:
The preferred method for clearing the zoning database from the switch is the reset zoning
command.
Authority Admin session and a Zoning Edit session.
Syntax
zoning clear
Examples The following is an example of the zoning clear command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #> zoning clear
8/20q FC Switch (admin-zoning) #> zoning save
See also
zoning
save, page 321
8/20q Fibre Channel Switch command line interface guide 311

Advertisement

Table of Contents
loading

This manual is also suitable for:

8/20q

Table of Contents