HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual page 157

Table 13 Group member attributes (continued)
Attribute
PrimarySecret
(ISL and Port Groups)
SecondaryHash
(ISL and Port Groups)
SecondarySecret
(ISL and Port Groups)
Secret
(MS Groups)
Binding
(ISL Groups)
Operands
list
Displays a list of all groups and the security sets of which they are members. This operand is
available without an Admin session.
members [group]
Displays all members of the group given by [group]. This operand is available without an Admin
session.
remove [group] [member_list]
Remove the port/device worldwide name given by [member] from the group given by [group].
Use a <space> to delimit multiple member names in [member_list]
rename [group_old] [group_new]
Renames the group given by [group_old] to the group given by [group_new].
securitysets [group]
Displays the list of security sets of which the group given by [group] is a member. This operand is
available without an Admin session.
type [group]
Displays the group type for the group given by [group]. This operand is available without an
Admin session.
Notes Primary and secondary secrets are not included in a switch configuration backup. Therefore, after
restoring a switch configuration, you must re-enter the primary and secondary secrets. Otherwise, the
switch will isolate because of an authentication failure.
For more information about managing groups in security sets, see the securityset command.
Description
Hexadecimal string that is encrypted by the primary hash for
authentication with the member. The string has the following lengths
depending on the primary hash function:
• MD5 hash: 16-byte
• SHA- 1 hash: 20-byte
Hash function to use to decipher the encrypted secondary secret sent
by the group member. Hash values are MD5 or SHA-1. The
secondary hash is used when the primary hash is not available on
the group member. The primary hash and the secondary hash cannot
be the same.
Hex string that is encrypted by the secondary hash and sent for
authentication. The string has the following lengths, depending on the
secondary hash function:
• MD5 hash: 16-byte
• SHA- 1 hash: 20-byte
Hexadecimal string that is encrypted by the hash function for
authentication with MS group members. The string has the following
lengths depending on the hash function:
• MD5 hash: 16-byte
• SHA- 1 hash: 20-byte
Domain ID of the switch to which to bind the ISL group member
worldwide name. This option is available only if
FabricBindingEnabled is set to True using the
set config security command. 0 (zero) specifies no binding.
8/20q Fibre Channel Switch command line interface guide 157