Ipsec Policy; Policy Configuration Parameters - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

Fibre channel switch
Hide thumbs Also See for AK241A - StorageWorks 8Gb Simple SAN Connection:
Table of Contents

Advertisement

ipsec policy

Description Manages policies in the Security Policy database.
Authority Admin session and an Ipsec Edit session
Syntax
ipsec policy
copy [policy_source] [policy_destination]
create [policy]
delete [policy]
edit [policy]
list [option]
rename [policy_old] [policy_new]
Operands
copy [policy_source] [policy_destination]
Creates a new policy named [policy_destination] and copies the configuration into it from the
policy given by [policy_source]. You must enter the ipsec save command afterwards to save
your changes. [policy_destination] must not begin with DynamicSP_, which is reserved for
dynamic policies.
create [policy]
Creates a policy with the name given by [policy]. A policy name must begin with a letter and be
no longer than 32 characters. Valid characters are alphanumeric, _, $, ^, and -. The Security
Policy database supports a maximum of 128 user-defined policies. You must enter the
ipsec save command afterwards to save your changes.
parameters:
Table 15
Parameter
Description
SourceAddress
SourcePort
DestinationAddress
DestinationPort
Protocol
ICMPv6 Type
174 Command reference

Policy configuration parameters

Description
Description of the policy
IP address (version 4 or 6) or DNS host name of the host, switch, or
gateway from which data originates
Source port number in the range 1—65535
IP address (version 4 or 6) or DNS host name of the host, switch, or
gateway receiving data. If you specified an IP address for the
SourceAddress, the DestinationAddress must use the same
IP version format.
Destination port number in the range 1—65535
Protocol or application to which to apply IP security. Enter an
operand for one of the following protocols or an integer in the
range 0—255:
ICMP number (0–255). You are prompted for this parameter only if
you specify ICMP6 for the Protocol parameter.
Internet Control Message Protocol for IPv4 (ICMP)
Internet Control Message Protocol for IPv6 (ICMP6)
Internet Protocol, version 4 (IPv4)
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Any protocol
Table 15
describes the policy

Advertisement

Table of Contents
loading

This manual is also suitable for:

8/20q

Table of Contents