Leds On The Supervisor-1 Module - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Chapter 1 Product Overview
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
•
Use only the CompactFlash devices that are certified for use with Cisco MDS switches and are formatted
Caution
using Cisco MDS switches. Using CompactFlash devices that are uncertified or are formatted using
other platforms may result in errors.

LEDs on the Supervisor-1 Module

The front panel on the Supervisor-1 module has the following LEDs:
•
•
•
•
•
•
The front panel on the supervisor module also includes a reset button (see
The LEDs on the Supervisor-1 module indicate the status of the Supervisor-1 module, power supplies,
and fan module.
Figure 1-15
OL-17467-02
CompactFlash slot for an optional CompactFlash card. The optional card can be used for storing
additional software images and configuration, debugging, and syslog information.
Status LED
System LED
Active LED
Power Management LED
MGMT 10/100 Ethernet port LEDs (at top of port):
Link LED (on left)
–
Activity LED (on right)
–
CompactFlash LED for external CompactFlash card
Table 1-5 provides more information about these LEDs.
Supervisor-1 Module LEDs
Figure
Cisco MDS 9500 Series Hardware Installation Guide
Supervisor Modules
1-15).
1-23