SFP and SFP+ Transceiver Specifications
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
•
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Cisco Gigabit Ethernet Transceivers
A 1-Gbps Gigabit Ethernet SFP transceiver is provided on the Cisco MDS 9000 IPS modules.
Table D-48
Table D-48
Transceiver Module Product Number
DS-SFP-GE-T
DS-SFP-GE-T is not supported on Cisco MDS 9222.
Note
General Specifications for Cisco Gigabit Ethernet Transceivers
Table D-49
Table D-49
SFP
DS-SFP-GE-T
Environmental and Power Requirement Specifications for Cisco Gigabit Ethernet Transceivers
Table D-50
Table D-50
SFP
DS-SFP-GE-T
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Cisco DWDM SFP Transceivers
The Cisco 2-Gbps DWDM SFP modules enable enterprises and service providers to provide scalable,
easy-to-deploy DWDM Fibre Channel services in their networks.
Cisco MDS 9500 Series Hardware Installation Guide
D-34
When interoperating a Cisco 4-Gbps CWDM SFP transceiver with a Cisco 1/2-Gbps CWDM
transceiver, the speed of ports on the Cisco 4-Gbps CWDM SFP transceiver must be manually
configured to 1-Gbps or 2-Gbps.
lists the transceiver supported on the Cisco MDS 9216.
Cisco Gigabit Ethernet SFP Transceivers
provides the general specification for the Cisco Gigabit Ethernet SFP transceiver.
General Specification for the Cisco Gigabit Ethernet SFP Transceivers
Cable Type
Category 5 UTP
provides the environmental specifications for the Cisco Gigabit Ethernet transceivers.
Environmental Specifications for Cisco Gigabit Ethernet Transceivers
Operating
Maximum
40°C
Description
1-Gbps Ethernet SFP
Cable Distance
100 m (328 ft)
Storage
Minimum
Maximum
0°C
85°C
Appendix D
Technical Specifications
Minimum
-40°C
OL-17467-02