Requirements Specific To Solid-Walled Cabinets; Solid-Walled Cabinet Requirements For The Cisco Mds 9513 Chassis - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Cabinet and Rack Requirements
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
A perforated cabinet that conforms to these requirements is available from Rittal Corporation:
A new cabinet that conforms to these requirements is available from Panduit Corporation:
A new cabinet that conforms to these requirements is available from Chatsworth Products:
Do not use the perforated cabinet from Rittal Corporation with the Cisco MDS 9513 Director.
Note

Requirements Specific to Solid-Walled Cabinets

A solid-walled cabinet is defined here as a cabinet with solid (nonperforated) front and rear doors and
solid side walls. In addition to the requirements listed in the
Racks" section on page

Solid-Walled Cabinet Requirements for the Cisco MDS 9513 Chassis

The solid-walled cabinet requirements for the Cisco MDS 9513 chassis are as follows:
•
Cisco MDS 9500 Series Hardware Installation Guide
C-4
Rittal Corporation
One Rittal Place
Springfield, OH 45504
Contact: (800) 477–4220
Cabinet P/N: Rittal 9969427
Cabinet description: PS-DK/OEM Cabinet Assembly, 78.7 in. (1998 mm) x 23.6 in. (600 mm) x
39.4 in. (1000 mm) (H x W x D) (42RU)
Panduit Corporation
17301 South Ridgeland Avenue
Tinley Park, IL 60477
Customer Service and Technical Support phone number: 800 777-3300.
Cabinet P/N: CN4-1
Cabinet description: Net-Access cabinet, 31.5 in. W X 40 in. D X 84 in. H (800 mm x 1017 mm x
2134 mm), 45 RU cable management on front and rear of front posts
For more information see http://www.panduit.com.
Chatsworth Products, Inc.
31425 Agoura Road
Westlake Village, CA 91361
Customer Service and Technical Support phone number 800 834-4969
Cabinet: P/N: NF2K-113C-C42
Cabinet description: The N-Series TeraFrame Network Cabinet, 31.4 in. W X 40.4 in. D X 83.4 in.
H (798 mm x 1025 mm x 2118 mm), 45 RU
For more information see: http://www.chatsworth.com/ciscoteraframe
C-1, solid-walled cabinets must meet the following requirements:
Perforated front and back doors and solid or open side panels.
Appendix C Cabinet and Rack Installation
"General Requirements for Cabinets and
OL-17467-02