Environmental And Power Requirements Specifications For Cisco 10-Gbps Ethernet X2 Transceiver; Cisco 10-Gbps Ethernet Dwdm X2 Transceiver; Sfp And Sfp+ Transceiver Specifications - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

SFP and SFP+ Transceiver Specifications

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Environmental and Power Requirements Specifications for Cisco 10-Gbps Ethernet X2 Transceiver

Table D-25
transceiver.
Table D-25
X2
DS-X2-E10G-SR
Table D-26
Table D-26
X2
DS-X2-E10G-SR
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.

Cisco 10-Gbps Ethernet DWDM X2 Transceiver

The Cisco 10-Gbps Ethernet DWDM X2 Transceiver pluggable module (DWDM-X2-xx.xx=) provides
high-performance Fibre Channel connectivity for the Cisco MDS 9000 family 10-Gbps Fibre Channel
switching module to an existing Ethernet DWDM infrastructure. The data format transmitted by the
Ethernet DWDM X2 transceiver on the fiber is identical to that transmitted by the Fibre Channel X2
transceiver, except that the Fibre Channel packets are clocked at the 10-Gigabit Ethernet rate.
The main features of the Cisco 10-Gbps Ethernet DWDM X2 Transceiver include:
•
•
For more information, refer to the data sheet at:
http://www.cisco.com/en/US/products/ps6576/index.html
SFP and SFP+ Transceiver Specifications
The Cisco MDS 9500 Series is compatible with SFP and SFP+ transceivers and cables that have LC
connectors. The wavelength of each transceiver must match the transceiver on the other end of the cable,
and the cable must not exceed the stipulated cable length for reliable communications.
Cisco SFP and SFP+ transceivers provide the uplink interfaces, laser transmit (TX) and laser receive
(RX), and support 850 to 1610 nm nominal wavelengths, depending upon the transceiver.
Cisco MDS 9500 Series Hardware Installation Guide
D-22
provides the power requirement specifications for the Cisco 10-Gbps Ethernet X2
Power Requirement Specification for Cisco 10-Gbps Ethernet X2 Transceivers
Average Transmit
Power (dBm)
Maximum
-1.2
provides the environmental specifications for the Cisco 10-Gbps Ethernet X2 transceivers.
Environmental Specifications for Cisco 10-Gbps Ethernet X2 Transceiver
Operating
Maximum
40°C
Support for 32 nontunable ITU 100-GHz wavelengths compatible with the Cisco ONS DWDM
channel plan.
Support for digital optical monitoring capability.
Average Receive
Power (dBm)
Minimum Maximum
-7.3 -1.0
Storage
Minimum Maximum
0°C 85°C
Appendix D Technical Specifications
Fiber Loss
Budget (dBm)
Minimum
-9.9 2.6 (50.0
micron-OM3)
Minimum
-40°C
OL-17467-02