Modifying The Radius Server Order; Removing A Radius Server - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual

17

Modifying the RADIUS Server Order

The RADIUS servers are contacted in the order they are listed, starting from the top of the list and
moving to the bottom.
To modify the order in which the RADIUS servers are contacted
1. Launch the Switch Admin module as described on
2. Click the AAA Service tab.
3. Click a RADIUS server from the RADIUS Configuration list.
4. Click the up and down arrows to rearrange the order of the RADIUS servers.
5. Click Apply.

Removing a RADIUS Server

Use the following procedure to remove a RADIUS server.
To remove a RADIUS server
1. Launch the Switch Admin module as described on
2. Click the AAA Service tab.
3. Click a RADIUS server from the RADIUS Configuration list.
4. Click Remove. If there is no RADIUS server configured, the Remove button is disabled. You
cannot remove the only RADIUS server if the RADIUS service is the primary AAA service.
The RADIUS server is not deleted until you apply the changes from the AAA Services tab.
5. Click Apply in the AAA Services tab.
A confirmation displays, warning you that you are about to remove the selected RADIUS server.
6. Click Yes in the confirmation
17-18
page 3-3.
page 3-3.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01