Installing A Web Tools License - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade web tools administrator's guide (53-0000194-01, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (406 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
1
5.
Type the following information:
-Xms256m sets the minimum heap size and -Xmx256m sets the maximum heap size. In this
instance, the minimum and maximum sizes are 256 MB.
6.
Click OK to close the Java Runtime Settings dialog box.
7.
Click Apply to apply your settings and close the Java Control Panel.
Installing a Web Tools License
You can install a Web Tools license either through telnet or over the Web. License keys are provided on
a per-chassis basis, so for products that support multiple logical switches (domains), a license key
applies to all domains within the chassis.
To determine whether a license is already installed on a switch, follow the instructions provided under
"Installing a Web Tools License Through Telnet,"
supplier to obtain a license key.
Installing a Web Tools License Through Telnet
Use the following procedure to determine whether a Web Tools license is installed on your switch and,
if not, install it.
To install a Web Tools license through telnet
1.
Log in to the switch via telnet (see the Fabric OS Administrator's Guide for more information),
using an account that has administrative privileges.
2.
To determine whether a Web Tools license is already installed on the switch, type licenseShow on
the telnet command line.
A list displays, showing all the licenses currently installed on the switch:
If the Web Tools license is not included in the list or is incorrect, continue with step 3.
3.
On the command line, type...:
...where
as given.
4.
Verify that the license was added by typing the following command:
If the Web Tools license is listed, the feature is available. If the license is not listed, repeat step 3.
1-6
-Xms256m -Xmx256m
switch:admin> licenseshow
1A1AaAaaaAAAA1a: ]-- This is the license key (excluding the colon). The installed feature is listed below.
Zoning license
1A2AaAbbbBBBA1a:
SES license
1A3AaAbcbBBCC1d:
QuickLoop license
licenseadd key
is the license key. The license key value is case-sensitive and must be entered exactly
key
licenseshow
next. If a license is not installed, contact your switch
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
Advertisement
Table of Contents
