Configuring Internet Explorer; Installing Java On The Workstation - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual

Configuring Internet Explorer

Correct operation of Web Tools with Internet Explorer requires specifying the appropriate settings for
browser refresh frequency and process model. Browser pages should be refreshed frequently to ensure
the correct operation of Web Tools.
To set the refresh frequency
1. Click Tools > Internet Options in the browser.
2. Click the General tab and click Settings (under "Temporary Internet Files").
3. Click Every visit to the page under "Check for newer versions of stored pages," as shown in
Figure 1-1
Figure 1-1

Installing Java on the Workstation

Java Plug-in version 1.5.0_06 must be installed on the workstation for the correct operation of Web
Tools. Java Plug-in version 1.4.2_08 is also supported.
If you try to launch Web Tools without any Java Plug-in installed,
•
Internet Explorer automatically prompts and downloads the proper Java Plug-in.
•
Firefox downloads the most recently released Java Plug-in.
If you try to launch Web Tools with an earlier version Java Plug-in installed,
•
Internet Explorer might prompt for an upgrade, depending on the existing Java Plug-in version.
•
Firefox uses the existing Java Plug-in.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
on page 1-3.
Configuring Internet Explorer
1
Configure your browser to check
for newer versions of stored pages
every visit to the page.
1-3