Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual page 189

Figure 10-4 Creating an SID/DID Performance Graph
3. Click a port from the Slot/Port or Sid/Did Selection List.
a.
b.
c.
4. Click a source ID from the "Port or Sid/Did Selection List," and click Add Sid. You can also type a
source ID in the "Enter/drag SID number" field.
5. Click a destination ID from the "Port or Sid/Did Selection List," and click Add Did. You can also
type a destination ID in the "Enter/drag DID number" field.
6. Click OK.
If you selected multiple EE monitors, SIDs, or PIDs, a confirmation dialog box displays, reminding
you that one graph will be opened for each selection. Click Yes to display the graphs.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
Drag the selected port into the Enter/drag port number field.
Click Retrieve preset EE monitors.
The current end-to-end monitors for that port are displayed in the "Current EE monitors set for
selected port" table.
Optional: To display a performance graph for the current EE monitors set for the selected port,
click a SID-DID pair in the table. You can select multiple source ID and Destination IDs. Click
Select. If you selected multiple SID/DID monitors, click OK in the confirmation dialog box
that appears. Skip to step 6.
If you do not want to display a performance graph for the current EE monitors set for the
selected port, continue with step 4.
10
10-11