7
Managing IP Routes for a GbE Port
You can configure a new IP route, edit an existing user-defined IP route, or delete an IP route by
clicking the Add, Edit, and Delete tasks respectively on the IP Routes tab for a GbE port.
Note
For each IP interface created in the GbE port, one default IP route will be automatically created.
To add a new IP route
1.
Click a port in the Switch View to launch the Port Management module in a separate window (see
Figure 5-1
2.
Click the GigE Ports subtab.
3.
Click the port you want to edit.
4.
Click the IP Routes subtab.
Figure 7-5
5.
Click Add in the task bar.
Type the destination IP address, subnet mask, gateway IP address, and metric for the new IP route.
6.
Click Add.
7-14
on page 5-2).
IP Routes Tab for GbE Ports
Caution
If IPSec is enabled, you are allowed only one static route per GbE port.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01