Renaming Fabric Assist Zones; Deleting Fabric Assist Zones - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade web tools administrator's guide (53-0000194-01, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (406 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
Renaming Fabric Assist Zones
Use the following procedure to change the name of a Fabric Assist zone.
To rename a Fabric Assist zone
1.
Launch the Zone Admin module as described on
2.
Click the Fabric Assist tab.
3.
Select the Fabric Assist Zone you want to rename from the Name drop-down menu.
4.
Click Rename.
The Rename a Fabric Assist Zone dialog box displays.
5.
Type a new Fabric Assist zone name and click OK.
The Fabric Assist zone is renamed in the Zone Admin buffer. At this point you can either save your
changes or save and enable your changes.
6.
Click Zoning Actions > Save Config Only to save the configuration changes.
To enable the configuration, see
Deleting Fabric Assist Zones
Use the following procedure to delete a Fabric Assist zone.
To delete a Fabric Assist Zone
1.
Launch the Zone Admin module as described on
2.
Click the Fabric Assist Zone tab.
3.
Select the Fabric Assist zone you want to delete from the Name drop-down menu.
4.
Click Delete.
The Confirm Deleting Fabric Assist Zone dialog box displays.
5.
Click Yes.
The selected Fabric Assist zone is deleted from the Zone Admin buffer. At this point you can either
save your changes or save and enable your changes.
6.
Click Zoning Actions > Save Config Only to save the configuration changes.
To enable the configuration, see
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
page
9-3.
"Enabling Zone Configurations"
page
9-3.
"Enabling Zone Configurations"
on page 9-23.
on page 9-23.
9
9-19
Advertisement
Table of Contents
