Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual page 187

3. To display detailed port throughput utilization rates for particular ports only, right-click anywhere
in the graph.and click Select Ports.
The setup dialog box displays, as shown in
depending on the type of graph you are customizing, but the layout of the dialog box is the same.
Figure 10-3
4. You can perform the following in the dialog box:
a.
b.
c.
d.
e.
f.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
shows an example of the setup dialog box for the Switch Throughput Utilization graph.
Figure 10-3 Switch Throughput Utilization Setup Dialog Box
Double-click the domain icon
For the SilkWorm 24000 and 48000 directors, click the + signs to expand the ports under
each slot, as shown in Figure
Click the particular port you want to monitor in the graph in the Port Selection List. Use Shift-
click and Ctrl-click to select multiple ports.
Click Add to move the selected ports to the Selected Ports list.
Optional: Click ADD ALL Ports to add all of the ports in the Port Selection List to the
Selected Ports list.
Optional: Click Search to launch the Search Port Selection List dialog box, from which you
can search for all E_Ports, all F_Ports, or all port names with a defined string. Select the ports
you want to add and click Search in the Search Port Selection List dialog box.
Click Apply.
Only the selected ports are displayed in the graph.
Figure 10-3. The title of the dialog box varies,
to expand the slot/port list.
10-3.
10
10-9