Initiating A Cp Failover - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade web tools administrator's guide (53-0000194-01, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (406 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
Figure 3-7
Initiating a CP Failover
A nondisruptive failover might take about 30 seconds to complete. During the failover, all of the Web
Tools windows and all associated child-windows are invalidated. You must close all Web Tools
windows and relaunch Web Tools.
To initiate a CP failover
1.
Launch the Hi Avail module as described in
page 3-16.
2.
Verify that the HA Status field displays Non-Disruptive Failover Ready or Disruptive Failover
Ready.
3.
Click Initiate Failover.
The Warning dialog box displays.
4.
Click Yes to initiate a nondisruptive failover.
5.
When prompted, close the Web Tools Switch Explorer window and all associated windows, and
relaunch Web Tools.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
HA Module Services Tab
"Launching the High Availability Module"
3
on
3-19
Advertisement
Table of Contents
