Configuring Access Control List Policies - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual

To expire a password
1. Launch the Switch Admin module as described on
2. Click the User tab.
3. Select the account.
4. Click the Expire Password button.
If the button is grayed out, this means the password is already expired.
5. Click Apply to save your changes.
To unlock a password
1. Launch the Switch Admin module as described on
2. Click the User tab.
3. Select the account.
4. Click the Unlock Password button.
If the button is grayed out, this means the password is already unlocked or was not locked out.
5. Click Apply to save your changes.

Configuring Access Control List Policies

Support for the Access Control List (ACL) policies is currently defined in the Switch Connection
Control (SCC) and Device Connection Control (DCC) policies. These policies are unlike the Secure
Fabric OS policies. In Secure Fabric OS where the SCC and DCC policies are always fabric wide
policies, these policies located in the Admin module are switch-based. ACL and Secure Fabric OS are
mutually exclusive. Unlike in Secure Fabric OS, SCC and DCC policy configuration in base Fabric OS
is performed on a switch-local basis.
Admin Domain considerations: ACL management can be done on AD255 and in AD0 only if other
there are no user-defined Admin Domains. Both AD0 (when no other user-defined Admin Domains
exist) and AD255 provide an unfiltered view of the fabric.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
page 3-3.
page 3-3.
17
17-9