Adding Unzoned Online Devices To A Zone Or Alias - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual

Adding Unzoned Online Devices to a Zone or Alias

When zoning is enabled, devices that are not included in a zone configuration are inaccessible to other
devices in the fabric. Use the following procedure to identify online devices that are not zoned in any
zone configuration and add them to a zone or alias.
To add unzoned online devices to a zone or alias
1. Launch the Zone Admin module as described on
2. Click Tools > Add Unzoned Devices.
The Add Unzoned Devices wizard starts.
Figure 9-8
3. Follow the steps outlined in the wizard.
The wizard displays unzoned devices and prompts you to select them and add them to an alias or a
zone.
When you have finished the steps for adding a device to a zone or alias, if there are any more
unzoned devices, you can either continue to add those unzoned devices or exit the wizard. If there
are no more unzoned devices, you must exit the wizard.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
Add Unzoned Devices Wizard
page 9-3.
9
9-33