Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual page 127

To edit FCIP tunnel configuration
1. Click a port in the Switch View to launch the Port Management module in a separate window (see
Figure 5-1
2. Click the GigE Ports tab.
3. Click on the port you want to edit.
4. Click the FCIP Tunnels subtab.
5. Select the tunnel to edit in the table on the right side of the window.
6. Click Edit Configuration in the task bar.
The GigE Port Configuration wizard launches. The wizard fields are populated with the current
configuration values.
7. Follow the steps outlined in the wizard.
To delete an FCIP tunnel
1. Click a port in the Switch View to launch the Port Management module in a separate window (see
Figure 5-1
2. Click the GigE Ports tab.
3. Click on the port you want to edit and click the FCIP Tunnels subtab.
4. Select the tunnel you want to delete in the table on the right side of the window. Use Shift-click and
Ctrl-click to select multiple tunnels.
5. Click Delete in the task bar.
6. Click Yes in the confirmation window.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
on page 5-2).
Note
You can observe the tunnel state transition from Inactive to In Progress at the bottom of
the FCIP Tunnels tab. Resize the column to view the full message.
on page 5-2).
7
7-17