3.
Optional: Click Print to print the zone configuration summary.
This launches the print dialog box.
Figure 9-5
Creating Configuration Analysis Reports
The configuration analysis report lists the following:
•
SAN components (ports, WWNs, and AL_PAs) that are not included in the configuration.
•
SAN components (ports, WWNs, and AL_PAs) that are in the configuration but not in the fabric.
To create a configuration analysis report
1.
Launch the Zone Admin module as described on
2.
Click the Zone Config tab.
3.
Select a configuration to be analyzed from the Name drop-down menu and click Analyze Zone.
A dialog box displays, asking if you want to refresh the fabric before running the analysis.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
Zone Configuration Summary
page
9-3.
9
9-27