Displaying Alarms - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual

13
4. Click the alarm area report to be viewed from the Area Selection menu.
5. Click the Configuration Report subtab.
This tab displays a report of the configuration for the selected area.

Displaying Alarms

Using the Alarm Notification tab, you can view a list of all alarms that have occurred for a selected
class/area (see
the FRU class, only the Name, State, and Time columns are displayed. In addition, if the FRU area is
Fan, the Name column refers to either a fan or a fan FRU, depending on the switch model. See
"Displaying Detailed Fan Hardware Status"
Table 13-1
Field
Name
State
Reason
Last Value
Current Value
Time
To view alarms
1. Launch the Fabric Watch module as described on
2. Click the class that you want to check for alarms in the Fabric Watch navigation tree.
3. Click the Alarm Notification tab.
4. Click the area that you want to check for alarms from the Area Selection menu.
All alarms for that area display.
For troubleshooting responses to alarms, see the Fabric Watch Administrator's Guide.
13-8
Figure 13-1 on page 13-2). Table 13-1
Alarm Notification Table Fields
Description
The string assigned to the element that had an event
The current state of the element
The event type that was triggered
The data value of the element when the event was triggered
The current data value of the element
Time when the event occurred
describes the columns in this report. (Note that for
on page 12-5 for more information.)
page 13-3.
Publication Number: 53-0000194-01
Web Tools Administrator's Guide