Displaying Enabled Zone Configurations - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual

Displaying Enabled Zone Configurations

The enabled zone configuration screen displays the actual content of the single zone configuration that
is currently enabled on the fabric, whether it matches the configuration that was enabled when the
current zone admin session was launched or last refreshed (see
QuickLoops, and FA zones are displayed, and their contents (ports, WWNs, AL_PAs) are displayed
next to them. Aliases are not displayed in the enabled zone configuration. If there is no active zone
configuration enabled on the switch, a message is displayed to that effect.
The enabled configuration is listed in the upper-right corner of the Zone Admin module.
Figure 9-4
To view the enabled zone configuration name without launching the Zone
Admin module
1. Select a switch from the
The selected switch appears in the
The current zone configuration name (if one is enabled) is displayed in the lower portion of the
Switch Information
in effect".
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
Effective Configuration Window
Fabric Tree.
Switch
View. If no zone configuration is enabled, the field displays "No configuration
Figure 9-4 on page 9-25). The zones,
View.
9
9-25