What's New In This Document - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual

In those instances in which procedures or parts of procedures documented here apply to some switches
but not to others, this guide identifies exactly which switches are supported and which are not.
Although many different software and hardware configurations are tested and supported by Brocade
Communications Systems, Inc. for Fabric OS 5.2.0, documenting all possible configurations and
scenarios is beyond the scope of this document; however, this document does specify when procedures
or parts of procedures apply only to specific switches.
This document does not support all Fabric OS versions. This document is specific to Fabric OS 5.2.0.
To obtain information about an OS version other than 5.2.0, refer to the documentation specific to that
OS version.

What's New in This Document

The following changes have been made since this document was last released:
•
•
•
For further information, refer to the release notes.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
Information that was added:
-
Support for Role-Based Access Control (RBAC)
-
Support for Administrative Domains (AD)
-
Support for the FR4-16IP port blade
-
Support for iSCSI management
-
Support for Access Control List (ACL) through SCC and DCC policies
-
Setting Default Zoning
Information that was changed:
-
OS/Browser Plugin Table
-
Zone Admin module
-
Port Module
-
Port Configuration wizard
-
Mandatory direct login to the switch
Information that was removed:
-
Port tab in the Switch Admin module
xvii