Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual page 181

Table 10-1
Graph Type
Port Throughput
Switch Aggregate Throughput
Blade Aggregate Throughput
Switch Throughput Utilization
Port Error
Switch Percent Utilization
Port Snapshot Error
Table 10-2
Graph Type
SID/DID Performance
SCSI vs. IP Traffic
AL_PA Errors
SCSI Commands by port and
LUN (R, W, R/W)
The SilkWorm 48000 with an FC4-18i and the SilkWorm 7500 include physical FC ports, logical FC
ports, and GbE ports. The SilkWorm 48000 with a or FC4-16IP blade includes physical FC ports and
GbE ports. Not all of the performance monitoring graphs support the logical FC ports and GbE ports.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
Basic Performance Graphs
Displays
The performance of a port, in bytes per second, for frames received
and transmitted.
The aggregate performance of all ports on a switch.
The aggregate performance of all ports on a port card. This graph is
available only for the SilkWorm 24000 and 48000 directors.
The port throughput, in Gbit/sec, at the time the sample is taken.
For the SilkWorm 24000 and 48000 directors, this graph displays
the throughput for each slot. You can customize this graph to
display information for particular ports.
CRC errors for a given port.
The percentage utilization for each port in a switch. For the
SilkWorm 24000 and 48000 directors, this graph displays the
percent utilization for each slot. You can customize this graph to
display information for particular ports.
The CRC error count between sampling periods for all the ports on
a switch. For the SilkWorm 24000 and 48000 directors, this graph
displays the CRC error rate for each slot. You can customize this
graph to display information for particular ports.
Advanced Performance Monitoring Graphs
Displays
The traffic between the SID-DID pair on the switch being managed.
For more information, see
Graphs"
The percentage of SCSI versus IP frame traffic on each individual
port. For more information, see
Graph" on page 10-12.
CRC errors for a given port and a given AL_PA. For more
information, see
The total number of read/write commands on a given port to a
specific LUN. For more information, see
Command Graphs"
"Creating SID-DID Performance
on page 10-10.
"Creating an SCSI vs. IP Traffic
"Creating AL_PA Error Graphs"
on page 10-13.
10
on page 10-13.
"Creating SCSI
10-3