Displaying Cup Port Connectivity Configurations - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade web tools administrator's guide (53-0000194-01, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (406 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
18
The Port Connectivity table (shown in
physical-location format), Port Name (port address name), Block attribute, Prohibit attribute, and Area
Id (port address, displayed in hexadecimal) in fixed columns. The right side is a port matrix, which lists
all ports by Area ID and identifies prohibited ports. Those columns are scrollable and swappable.
Displaying CUP Port Connectivity
Configurations
Use the following procedure to display a list of CUP port connectivity configurations, as shown in
Figure 18-3
To display the CUP Port Connectivity Configurations list
1.
Click a FICON-enabled switch from the
2.
Launch the Switch Admin module as described on
3.
Click the FICON CUP tab.
The FICON CUP tabbed page displays, with the FICON Management Server subtabbed page in
front (see
enabled.
18-8
Figure 18-4
on page 18-9.
Figure 18-1
on page 18-3). All attributes on this page are read-only until FMS mode is
on page 18-11) displays the Port number (in
Fabric
Tree.
page
3-3.
Publication Number: 53-0000194-01
Web Tools Administrator's Guide
Advertisement
Table of Contents
