Best Practices For Zoning - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade web tools administrator's guide (53-0000194-01, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (406 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
3.
Follow the steps outlined in the wizard.
The wizard allows you to define one and only one name for each device port (WWN). Devices with
one or more aliases are considered already named and are not displayed.
Figure 9-9
Best Practices for Zoning
The following are recommendations for using zoning:
•
Always zone using the highest Fabric OS-level switch.
Switches with lower Fabric OS versions do not have the capability to view all the functionality that
a newer Fabric OS provides as functionality is backwards compatible but not forwards compatible.
•
Zone using the core switch versus an edge switch.
•
Zone using a director over a switch.
A director has more resources to handle zoning changes and implementations.
•
Zone on the switch you connect to when bringing up Web Tools (the proxy switch).
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
Note
To enter a zone alias name, double-click the Zone Alias field for each device, as shown
in
Figure 9-9
on page 9-35, and type the name.
After typing each alias name, you must press Enter or click another zone alias field, or
the wizard does not accept the name.
Entering a Zone Alias in the Define Device Alias Wizard
9
9-35
Advertisement
Table of Contents
