To use Easy Create
1.
Launch the iSCSI Target Gateway Admin module as described on
2.
Select the Targets tab
3.
Click Easy Create.
Figure 15-10 Easy Create Wizard
4.
Follow the instructions in the wizard to create a virtual target in iSCSI.
The wizard is self-explanatory, so the individual steps are not described in this document.
To edit an iSCSI Target
1.
Launch the iSCSI Target Gateway Admin module as described on
2.
Select the Targets tab.
3.
Select the IQN in the left pane of where you want to edit the targets.
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
Note
When you click Add in the Easy VT Creation dialog, virtual targets virtual targets are
created for all the available physical targets in a 1:1 combination. If you add the virtual
target using the Add button and click OK, the virtual target will be created for only the
physical targets that were selected.
15
page
15-6.
page
15-6.
15-13