Launching Web Tools - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual

Brocade web tools administrator's guide (53-0000194-01, november 2006)
Hide thumbs Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
Table of Contents

Advertisement

1
Web Tools is part of the Fabric OS of a switch. When you launch Web Tools on a switch, you can
manage other switches in the fabric that have lower or higher firmware versions. It is important to note
that when accessing these switches you are opening the remote switch's version of Web Tools, and the
functionality available for those switches might vary.

Launching Web Tools

You can launch Web Tools on any workstation with a compatible Web browser installed. For a list of
Web browsers compatible with Fabric OS 5.2.0, see
protocol, if that protocol is enabled for the switch. For more information on enabling the HTTPS
protocol on your switch, see the Fabric OS Administrator's Guide.
To launch Web Tools
1.
Launch the Web browser and type the IP address of the licensed switch in the Address field:
or
2.
Press Enter.
You are prompted to log in to the switch. See
What happens next depends on the switch type:
For the SilkWorm 200E, 3250, and 4100 switches, one of the following launches, depending on
the switch configuration:
-
-
For the SilkWorm AP7420, the Web Tools—AP Edition interface launches (see
page 1-10). See the Web Tools—AP Edition Administrator's Guide for information on using the
Web Tools—AP Edition interface for the SilkWorm AP7420.
For all other switches, the Web Tools interface launches.
This book describes the Web Tools interface.
1-8
http://10.77.77.77
https://10.77.77.77
EZSwitchSetup Switch Manager (see
This interface launches if the switch has already been set up and is configured with
EZSwitchSetup. See the EZSwitchSetup Administrator's Guide for information about the
EZSwitchSetup interface.
If you want to use Web Tools instead of EZSwitchSetup, click Advanced Management in the
lower-left corner of this window to launch the Web Tools interface.
Web Tools (see
Figure 1-5
on page 1-9)
This interface launches if the switch is configured with the command line interface (CLI) or
Web Tools.
Table
1-1. Web Tools also supports HTTPS
"Logging In"
on page 1-13 for more information.
Figure
1-4)
Web Tools Administrator's Guide
Publication Number: 53-0000194-01
Figure 1-6
on

Advertisement

Table of Contents
loading

Table of Contents