Creating Configuration Analysis Reports; Displaying Zones Initiator/Target Accessibility - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

CREATING CONFIGURATION ANALYSIS REPORTS

The configuration analysis report lists the following:
•
•
To create a configuration analysis report
1. Open the Zone Administration window as described on
2. Click the Zone Config tab.
3. Select a configuration to be analyzed from the Name drop-down list and click Analyze Zone
4. Click Yes or No.

DISPLAYING ZONES INITIATOR/TARGET ACCESSIBILITY

The Initiator/Target Accessibility Matrix shows a list of initiators and a list of targets and indicates
which initiator can access which target.
To display a Zones Initiator/Target Accessibility Matrix
1. Open the Zone Administration window as described on
2. Click the Zone Config tab.
3. Select a configuration to be analyzed for device accessibility from the Name drop-down list.
Web Tools Administrator's Guide
Publication Number: 53-1000435-01
SAN components that are not included in the configuration.
SAN components that are in the configuration but not in the fabric.
Config.
A message opens to you if you want to refresh the fabric before running the analysis.
The configuration analysis window displays.
FIGURE 50
Configuration Analysis window
Managing zone configurations
page 96.
page 96.
8
113