Displaying Switches In Access Gateway Mode; Track And Control Switch Changes; Enabling The Track Changes Feature; Displaying The Status Of The Track Changes Feature - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

The number of devices listed should reflect the number of devices that are connected.

Displaying switches in Access Gateway mode

1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the agShow command.
switch:admin> agshow
Worldwide Name
--------------------------------------------------------------
10:00:00:05:1e:02:1d:b0
10:00:00:05:1e:03:4b:e7
10:00:00:05:1e:35:a2:58
This command displays all the switches in Access Gateway mode in the
fabric.

Track and control switch changes

The track changes feature allows you to keep a record of specific changes that may not be considered
switch events, but may provide useful information. The output from the track changes feature is dumped to
the system messages log for the switch. Use the errDump or errShow command to view the log.
Items in the log created from the Track changes feature are labeled TRCK.
Trackable changes are:
• Successful login
• Unsuccessful login
• Logout
• Configuration file change from task
• Track changes on
• Track changes off
An SNMP-TRAP mode can also be enabled (see the trackChangesHelp command in the Fabric OS
Command Reference).

Enabling the track changes feature

1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the trackChangesSet 1 command to enable the track changes feature.
A message is displayed, verifying that the track changes feature is on:
switch:admin> trackchangesset 1
Committing configuration...done.
switch:admin>
3. View the log using the commands errDump |more to display a page at a time or errShow to view
one line at a time.
2008/10/10-08:13:36, [TRCK-1001], 5, FID 128, INFO, ras007, Successful
login by user admin.

Displaying the status of the track changes feature

1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the trackChangesShow command.
60
Ports Enet IP Addr
16 10.32.53.4
24 10.32.60.95
20 10.32.53.180
Firmware Local/Remote Name
v6.1.0 local ag_01
v6.1.0 local ag_02
v6.1.0 remote ag_03