HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 225
Hp storageworks fabric os 6.2 administrator guide (5697-0016, may 2009)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Administrator's manual (518 pages) ,
- Hardware reference manual (256 pages) ,
- User manual (248 pages)
Table of Contents
Advertisement
10.
As an option, after the failover, connect to the switch, and log in again as admin. Using a separate
session to connect to the switch, enter the firmwareDownloadStatus command to monitor the
firmware download status.
sw77:admin> firmwareDownloadstatus
[1]: Thu Mar 06 00:30:49 2008
Slot 2 (SAS): Firmware is being downloaded to the blade. It may take up to
30 minutes.
[2]: Thu Mar 06 00:30:49 2008
Slot 7 (SAS): Firmware is being downloaded to the blade. It may take up to
30 minutes.
[3]: Thu Mar 06 00:30:49 2008
Slot 2 (SAS): Firmware has been downloaded successfully to the blade.
[4]: Thu Mar 06 00:30:49 2008
Slot 7 (SAS): Firmware has been downloaded successfully to the blade.
[5]: Thu Mar 06 00:30:49 2008
Slot 2 (SAS): Blade is rebooting.
[6]: Thu Mar 06 00:30:49 2008
Slot 7 (SAS): Blade is rebooting.
[7]: Thu Mar 06 00:30:49 2008
Slot 2 (SAS): Firmware commit is started.
[8]: Thu Mar 06 00:30:49 2008
Slot 7 (SAS): Firmware commit is started.
[9]: Thu Mar 06 00:30:49 2008
Slot 2 (SAS): Firmware commit has completed.
[10]: Thu Mar 06 00:30:49 2008
Slot 7 (SAS): Firmware commit has completed.
(Firmwaredownload has completed.)
1 1.
Enter the firmwareShow command to display the new firmware versions. The following is an example
of firmwareShow output on the HP StorageWorks 4/256 SAN Director.
Fabric OS 6.2 administrator guide 223
Hide quick links:
Advertisement
Table of Contents
