HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 402

In Fabric OS 5.3.0 and later, you can have 3000 LSAN zones configurable up to a maximum of 5000.
On a dual-CP switch, both CPs must have 5.3.0 code or later to select 5000. If the active CP is running
Fabric OS 5.3.0 or later with a maximum count of 5000 LSANs and the standby CP is running an
earlier firmware version, HA synchronization will fail. If 5000 is selected before downgrading to an
earlier version of Fabric OS, you are prompted to go back to the default maximum LSAN count of
3000.
• For Proxy Device Slots, the physical and proxy devices use the 10000 device slots.
The information shows the maximum pool size for translate phantom node and port WWNs and shows
the number of translate node and port WWNs from this pool.
• Phantom Node WWN
• Phantom Port WWNs
• Max proxy devices
• Max NR_Port
The following example shows the use of the fcrResourceShow command to display physical port
(EX_Port) resources.
switch:admin> fcrresourceshow
Daemon Limits:
LSAN Zones:
LSAN Devices:
Proxy Device Slots:
Phantom Node WWN:
Phantom Port WWN:
Port Limits:
Max proxy devices:
Max NR_Ports:
Currently Used(column 1: proxy, column 2: NR_Ports):
0 |
1 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
400 Using the FC-FC routing service
Max AllowedCurrently Used
-------------------------------
300028
1000051
1000020
WWN Pool SizeAllocated
---------------------------------
8192 5413
3276816121
2000
1000
0 34
3 34
0 0
0 0
0 0
0 0
6 34
6 34
6 34
6 34
6 34
6 34
6 34
6 34
8 34
8 34
8 34
8 34
8 34
8 34
8 34
8 34