Displaying Ex_Port Trunking Information; Lsan Zone Configuration; Use Of Administrative Domains With Lsan Zones And Fcr; Zone Definition And Naming - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Displaying EX_Port trunking information

1. Log in as an admin and connect to the switch.
2. Enter the switchShow command to display trunking information for the EX_Ports.
fcr_switch:admin_06> switchshow
The following is an example of a master EX_Port and a slave EX_Port displayed in switchShow:
Index Slot Port Address Media Speed State
==============================================
16 2 0 ee1000
17 2 1 ee1100
18 2 2 ee1200
(fabric id = 2 )(Trunk master)
19 2 3 ee1300
20 2 4 ee1400
21 2 5 ee1500
22 2 6 ee1600
23 2 7 ee1700
(fabric id = 2 )(Trunk master)

LSAN zone configuration

An LSAN consists of zones in two or more edge or backbone fabrics that contain the same devices. LSANs
essentially provide selective device connectivity between fabrics without forcing you to merge those fabrics.
FC routers provide multiple mechanisms to manage interfabric device connectivity through extensions to
existing switch management interfaces. You can define and manage LSANs using Advanced Zoning.

Use of administrative domains with LSAN zones and FCR

You can create LSAN zones as a physical fabric administrator or as an individual administrative domain
(AD) administrator. The LSAN zone can be part of the root zone database or the AD zone database. FCR
harvests the LSAN zones from all administrative domains. If both edge fabrics have the matching LSAN
zones and both devices are online, FCR triggers a device import. To support legacy applications, WWNs
are reported based on the administrative domain context. As a result, you must not use the network
address authority (NAA) field in the WWN to detect an FC Router. LSAN zone enforcement in the local
fabric occurs only if the administration domain member list contains both of the devices (local and
imported device) specified in the LSAN zone.
For more information, see Chapter 7,

Zone definition and naming

Zones are defined locally on a switch or director. Names and memberships, with the exception of hosts
and targets exported from one fabric to another, do not need to be coordinated with other fabrics. For
example, in "Edge SANs connected through a backbone
SAN 1 are defined, you do not need to consider the zones in Edge SAN 2, and vice versa.
Zones that contain hosts and targets that are shared between the two fabrics need to be explicitly
coordinated. To share devices between any two fabrics, you must create an LSAN zone in both fabrics
containing the port WWNs of the devices to be shared. Although an LSAN is managed using the same
tools as any other zone on the edge fabric, two behaviors distinguish an LSAN from a conventional zone:
• A required naming convention. The name of an LSAN begins with the prefix LSAN_. The LSAN name is
case-insensitive; for example, lsan_ is equivalent to LSAN_, Lsan_, and so on.
• Members must be identified by their port WWN because port IDs are not necessarily unique across
fabrics. The names of the zones need not be explicitly the same, and membership lists of the zones
need not be in the same order.
NOTE: The LSAN_ prefix must appear at the beginning of the zone name. LSAN zones may not be
combined with QoS zones. See
convention for QoS zones.
386 Using the FC-FC routing service
id N4 No_Light
id N4 Online EX_Port
id N4 Online EX_Port
id N4 No_Light
id N4 Online EX_Port
id N4 Online EX_Port
id N4 Online EX_Port
id N4 Online EX_Port
"Using the FC-FC routing
"QoS zones" on page 361 for more information about the naming
(Trunk port, master is Slot
10:00:00:05:1e:35:bb:32 "MtOlympus_82"
(Trunk port, master is Slot
(Trunk port, master is Slot
(Trunk port, master is Slot
10:00:00:60:69:80:1d:bc "MtOlympus_72"
service" on page 367.
fabric" on page 371, when the zones for Edge
2 Port 2 )
2 Port 7 )
2 Port 7 )
2 Port 7 )