Releasing A Port From A Pod Set - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

2. Enter the licensePort
switch:admin> licenseport --show
24 ports are available in this switch
Full POD license is installed
Dynamic POD method is in use
24 port assignments are provisioned for use in this switch:
12 port assignments are provisioned by the base switch license
12 port assignments are provisioned by a full POD license
10 ports are assigned to installed licenses:
10 ports are assigned to the base switch license
0 ports are assigned to the full POD license
Ports assigned to the base switch license:
1*, 2*, 3*, 4*, 5*, 6*, 8*, 21, 22, 23
Ports assigned to the full POD license:
None
Ports not assigned to a license:
0, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20
Take the following appropriate action based on whether port reservations are available:
3.
• If a port reservation is available, enter the licensePort
license for the port. Then go to step 6.
switch:admin> licenseport -reserve 0
• If all port reservations are assigned, select a port to release its POD license. You must disable the
port first by entering the command portDisable <port num>.
4. Enter the licensePort
switch:admin> licenseport --release 0
5. Enter the licensePort
switch:admin> licenseport --show
24 ports are available in this switch
Full POD license is installed
Dynamic POD method is in use
24 port assignments are provisioned for use in this switch:
12 port assignments are provisioned by the base switch license
12 port assignments are provisioned by a full POD license
10 ports are assigned to installed licenses:
10 ports are assigned to the base switch license
0 ports are assigned to the full POD license
Ports assigned to the base switch license:
1*, 2*, 3*, 4*, 5*, 6*, 8*, 21, 22, 23
Ports assigned to the full POD license:
None
Ports not assigned to a license:
0, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20
6. Enter the switchEnable command to bring the switch back online.
switch:admin> switchenable

Releasing a port from a POD set

Releasing a port removes it from the POD set; the port appears as unassigned until it comes back online.
Persistently disabling the port ensures that the port cannot come back online and be automatically
assigned to a POD assignment.
show command to verify that there are port reservations still available.
--
release command to remove the port from the POD license.
--
show command to verify that there is an available port reservation.
--
reserve command to reserve a
--
Fabric OS 6.2 administrator guide 53