Mapping Luns On A Specific Port To An Iscsi Vt - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

-l <n:n>
The following is an example:
switch:admin> iscsicfg --add lun -t
iqn.2002-12.com.brocade:example-disk001 \
-w 21:00:00:04:cf:e7:73:7e -l 0:0
The operation completed successfully.
6. Enter the iscsiCfg
added to the iSCSI VT, where -t is the IQN that identifies the iSCSI VT.
The following is an example.
switch:admin> iscsicfg --show lun -t
iqn.2002-12.com.brocade:example-disk001
Number of targets found: 1
Target: iqn.2006-10.com.example:disk001
Number of LUN Maps: 1
FC WWN
21:00:00:04:cf:e7:73:7e

Mapping LUNs on a specific port to an iSCSI VT

1. Connect to the switch and log in.
2. Enter the iscsiCfg
options to add LUNs attached to a specific port device to an iSCSI VT
where:
-t <IQN>
-w <port_WWN>
-l <n:n>
The following example maps two LUNs attached to port 2f:ff:00:06:2b:0d:12:99 to an iSCSI VT
named iqn.2002- 1 2.com.brocade:example-disk001.
switch:admin> iscsicfg --add lun -t
iqn.2002-12.com.brocade:example-disk001 \
-w 2f:ff:00:06:2b:0d:12:99 -l 1-2:0-1
The operation completed successfully.
switch:admin> iscsicfg --show lun -t
iqn.2002-12.com.brocade:example-disk001
Number of targets found: 1
Target: iqn.2002-12.com.brocade:example-disk001
Number of LUN Maps: 2
FC WWN
21:00:00:04:cf:e7:73:7e
2f:ff:00:06:2b:0d:12:99
Maps the physical FC LUNs to virtual iSCSI LUNs and is specified as a pair:
LUNs:physical LUNs
show lun command with –t <IQN> options to verify that the LUN has been
--
add lun command with –t <IQN>, –w <port_WWN>, and –l <n:n>
--
Specifies the unique IQN name for the iSCSI VT in the format:
iqn.2002- 1 2.com.brocade:<user_defined_name>.
Specifies the port WWN of the physical FC target
Maps the physical FC LUNs to virtual iSCSI LUNs and is specified as a pair:
LUNs:physical LUNs
Virtual LUN(s)
0
Virtual LUN(s)
0
1-2
Fabric OS 6.2 administrator guide 317
Physical LUN(s)
0
Physical LUN(s)
0
0-1