Enabling F_Port Trunking - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

4. Show the TA port configuration (ports still disabled):
switch:admin> porttrunkarea --show enabled
Slot Port
-------------------------------------------
10 13
10 14
-------------------------------------------
5. Enable ports 13 and 14:
switch:admin> portenable 10/13
switch:admin> portenable 10/14
6. Show the TA port configuration:
switch:admin> porttrunkarea --show enabled
Slot Port
-------------------------------------------
10 13
10 14

Enabling F_Port trunking

The following example shows how to enable F_Port trunking on a stand-alone switch using ports 36–39.
1. Disable ports 36–39 by entering the portDisable port command for each port to be included in the
TA.
2. Enable Trunk Area for ports 36–39 with area number 37:
switch:admin> porttrunkarea --enable 36–39 -area 37
Trunk area 37 enabled for ports 36, 37, 38 and 39.
3. Re-enable ports 36–39 by issuing portEnable port for each port in the TA.
450 Administering ISL trunking
Type State Master
-- -- --
-- -- --
Type State Master
F-port Master 10/13
F-port Slave 10/13
TI DI
125 125
125 126
TI DI
125 125
125 126