Power Requirements; Operating Tolerances; Laser Information - HP StorageWorks Director 2/64 Installation Manual

Power Requirements

Table 9
Table 9: Power Requirements
Input voltage
Input frequency

Operating Tolerances

Table 10
acoustical noise, and inclination.
Table 10: Operating Tolerances
Heat dissipation
Cooling airflow
clearances
Shock and vibration
tolerance
Acoustical noise
Inclination

Laser Information

Three configurations of cards with fixed optics will be provided for each of the
connector types: four extended long-wave ports, four long-wave ports, and four
short-wave ports.
Director 2/64 Installation Guide
lists Director 2/64 power requirements.
Specification
100 to 120 or 200 to 240 VAC
50/60 Hz
lists heating and cooling specifications, shock and vibration tolerances,
Specification
16 UPM cards (maximum): 490W (1,672 BTU/hr)
Right and left sides: 5.1 cm (2.0 in)
Front and rear: 7.6 cm (3.0 in)
Top and bottom: No clearance required
60 Gs for 10 milliseconds without non-recoverable errors
6.9 Bels
10° maximum
Table 11
Value
lists the 2 Gb laser specifications.
Technical Specifications
Value
137