Enable Call Home Notification; Backup & Restore Configuration; Reset Configuration; Help Menu - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Enable Call Home Notification

Note:
(unchecked).
Backup & Restore Configuration
Note:

Reset Configuration

Help Menu

Click on the Help menu on the menu bar to display the following options.
Edge Switch 2/24 Product Manager User Guide
The default setting for the Enable Call Home Notification function is disabled
Select Enable Call Home Notification from the Maintenance menu to
enable the call-home function for the switch.
The parameters of the call-home feature are configured in Windows. Refer to
the HAFM server installation guide for instructions.
Select this option to save the product configuration stored on the switch to the
HAFM server hard disk or to restore the configuration data from the HAFM
server. Only a single copy of the configuration is kept on the server.
This backup is primarily for single-CTP systems, where a backup is needed to
restore the configuration data to a replacement CTP card. You cannot modify
the location or the file name of the saved configuration.
For additional information on using this option, refer to
Restoring Configuration
You can only restore the configuration to a switch with the same IP address.
Select this option to reset all switch configuration data back to the factory
defaults. A confirmation dialog box displays with a warning upon selecting
the option. For additional information on using this option, refer to
Configuration" on page 164.
Caution: This operation resets all configuration including any optional
features that have been installed. You will need to re-enter your feature key to
enable all optional features after resetting the configuration.
Data" on page 137.
Product Manager Overview
"Backing Up and
"Reset
41