Ports; Snmp Agent; Features; Date And Time - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Product Manager Overview

Ports

Note:
if a device is connected, E_Ports if a switch is connected and FL_Port if connected to a
loop device.

SNMP Agent

Features

Date and Time

36
connection policy (Restrict E_Ports, Restrict F_Ports, or All Ports). Edit
Membership List allows you to create a list of switches and devices that you
want to allow exclusively to attach to switch ports. Switch Binding is an
optional feature that requires the SANtegrity Binding feature key. The feature
can be installed through the Configure Feature Key dialog box. For details,
refer to "SANtegrity Binding
Select this option to display the Configure Ports dialog box. For each port
you can provide a name, block or unblock operation, configure extended
distance buffering for 10 to 100km, enable LIN alerts for each port, enable
Fabric Address Notification (FAN), define a type (G, F, E, Gx, and Fx),
configure port binding, define port speed and enable port binding.
Ports are automatically configured as G_Ports if no device is connected, F_Ports
Select this option to display the Configure SNMP dialog box. Use this dialog
box to configure network addresses and community names for up to six
SNMP trap recipients. Also authorize write permissions to enable SNMP
management stations to modify writable MIB variables. In addition, you can
enable authorization traps to be sent to management stations when
unauthorized stations request access to switch SNMP data.
Displays the Configure Feature Key dialog box. Use this dialog box to enter
a feature key to enable optional features that you have purchased for the
switch.
Select this option to display the Configure Date and Time dialog box. Use
this option to set the current date and time in the switch. When the Periodic
Date/Time Synchronization check box is checked, the Date and Time fields
are greyed out (disabled), and the HAFM server date and time periodically
synchronizes the switch date and time. If the Periodic Date/Time
Synchronization check box is not checked, you can set the date and time in
the dialog box fields manually.
Features" on page 169.
Edge Switch 2/24 Product Manager User Guide