Front View - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Monitoring and Managing the Switch

Front View

1. Port Attention Indicator: The yellow triangle ( ) indicates that a link incident
2. Port LED Indicator: A green and amber indicator to the left of each port
3. Port Failure Indicator: A blinking red and yellow diamond ( ) below a port
4. Beaconing or Diagnostic Test: When a blinking amber LED indicator displays
5. Not Installed. The port optics are not installed, or the feature that provides
6. Power, System Error, and Unit Beaconing Indicators: The green and amber
62
occurred or that the port is not operational, in nonstandard mode of operation,
or has other status. You can determine the reason for a link incident by
displaying the Port Properties dialog box for the port. For details on status
indicators, refer to Table 4
"Link Incident Alerts" on page 98.
connector simulates LED operation on the actual switch port. When the green
indicator illuminates, the port is online and operational. When the amber
indicator remains illuminated, the port has failed. For details on port LED
indicator operation, refer to
connector indicates that the port has failed. Refer to
details on port operating states and the status symbol and indicator operation.
by a port and an attention indicator ( ) displays below the port's connector,
either diagnostic tests are running on the port or beaconing is enabled. Refer
to Table 4 on page 94 for details on port operating states and the status symbol
and indicator operation.
additional port function is not enabled.
indicators on the far right of the front view simulates the power and system
error LEDs on the actual switch.
Power Indicator. The green indicator (PWR) simulates the power LED on
the actual switch. When the indicator illuminates, the switch is connected
to facility AC power and is operational. The indicator will be on if either
power supply is operating.
System Error Indicator. The amber system error light indicator (ERR)
simulates the system error light on the actual switch. When this indicator
illuminates, an event has occurred requiring immediate attention, such as
a system, fan, power supply, or port failure. View details of system errors
by selecting Event Log from the Logs menu on the Product Manager
menu bar. The indicator in the Hardware View and the LED on the actual
unit remains illuminated until you clear the event by right-clicking on the
front or rear view away from a hardware component and selecting Clear
System Error Light from the menu.
on page 94. For details on link incidents, refer to
Table 4 on page 94.
Edge Switch 2/24 Product Manager User Guide
Table 4 on page 94 for