HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 200

Product Manager Messages
Table 5: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
The firmware file is
corrupted.
The firmware version
already exists.
The HAFM server is busy
processing a request
from another Product
Manager
The link to the switch is
not available.
The maximum number of
address configurations
has been reached.
The optical transceiver is
not installed.
The switch did not
respond in the time
allowed.
The IPL configuration
cannot be deleted.
This feature has not been
installed. Please contact
your sales representative.
198
Message
A firmware file has
corrupt data.
Firmware version already
exists in the database.
The HAFM server could
not process the current
request because it is busy
handling a request from
another Product
Manager.
The link from the HAFM
server to the switch is not
available.
The maximum number of
saved address
configurations has been
reached.
No information available
for a port that is not
installed.
A time out was reached
waiting for the switch to
respond to the action.
Deletion of the IPL
address configuration
was attempted and was
not allowed.
Indicator that the feature
has not been installed on
this switch.
Description
Edge Switch 2/24 Product Manager User Guide
Action
Contact support personnel.
N/A. An informational
message.
Retry the operation later. If
the condition persists,
contact support personnel.
Check Ethernet connection.
Delete configurations no
longer needed to allow new
configuration to be saved.
Ensure the optical
transceiver is installed and
fully seated.
Try action again.
Cancel the operation.
Contact your sales
representative to obtain the
desired feature.