HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 67

Monitoring and Managing the Switch
The following paragraphs describe the fields in the Port Properties dialog box:
Port Number
The physical port number.
Port Name
User-defined port name or description. Refer to "Configure Ports" on
page 111 for instructions.
Type
— Gx_port or G_port. This displays if nothing is logged into the port.
— F_Port. This displays if a device is logged into the port.
— E_Port. This displays if the port is connected to another switch's E_Port
via an ISL.
— FL_Port. This displays if a private loop device is logged into the port.
Operating Speed
This field displays the current data speed for the port as 1 Gb/sec, 2 Gb/sec, or
Not Established. Not Established displays if Negotiate was set for the
port through the Configure Ports dialog box and the data speed has not been
resolved between the port and the attached device, or if the port and device are
not communicating.
Port WWN
The port's 16-digit worldwide name (WWN).
Attached Port WWN
The WWN of the node logged into the port.
Block Configuration
Blocked or unblocked. Operation can be blocked or unblocked through the
Configure Ports dialog box. Refer to "Configure Ports" on page 111 for
instructions.
LIN Alerts Configuration
This field indicates whether LIN alerts are enabled or disabled. LIN alerts can
be configured through the Configure Ports dialog box. The default is for the
LIN alerts to be enabled.
FAN Configuration
Indicates whether Fabric Address Notification (FAN) is On or Off when the
port is operating as an FL_Port.
Edge Switch 2/24 Product Manager User Guide 65