Configure Identification; Configure Identification Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring the Switch

Configure Identification

Use the procedure in this section to identify the switch by its name, description,
location, and contact person. This information displays in the following Product
Manager locations:
The name also displays in the switch icon label in the HAFM Product tab if the
product name is enabled through the HAFM Display Options.
Data entered through the following procedure is saved in nonvolatile random
access memory (NV-RAM) on the switch.
To configure identification for the switch, use the following steps:
1. From the menu bar, select Configuration > Identification.
Figure 25: Configure Identification dialog box
2. Click in the name field and enter a name for the switch. The name could
3. Click in the Description field and enter a description of the switch.
4. Click in the Location field and enter the location of the switch.
5. Click in the Contact field and enter appropriate information about a contact
102
Product Manager window title panel (name)
Switch Properties dialog box (name, location, contact, description)
Identification table at the top of the Hardware View (name, location,
description)
The Configure Identification dialog box displays.
reflect the switch's Ethernet network domain name service (DNS) host name,
if assigned.
person, such as a phone number, title, or e-mail address.
Edge Switch 2/24 Product Manager User Guide