Configure Fabric Parameters Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

Configuring the Switch
To configure fabric operating parameters
1. The switch must be offline to configure parameters in this dialog box. If it is
2. Select Configure > Operating Parameters > Fabric Parameters.
Figure 27: Configure Fabric Parameters dialog box
Note:
defaults. Change this value if the switch will participate in a multi-switch fabric.
3. Use information described earlier in this section to change settings as required
4. After you change settings, click the Activate button.
110
not and you activate values in this dialog box, a dialog box displays prompting
you to set the unit offline.
Caution:
Setting the switch offline terminates all Fibre Channel connections.
To set the unit offline:
a. From the Product Manager window menu bar, select Maintenance > Set
Online State.
b. When the Set Online State dialog box displays, click Set Offline.
c. When the warning box displays asking you to confirm the offline state,
click OK.
The Configure Fabric Parameters dialog box displays.
Ordinarily, you do not need to change values in this dialog box from their
for parameters in this dialog box.
Edge Switch 2/24 Product Manager User Guide

Advertisement

Table of Contents
loading

Table of Contents