Modify An Alert - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring the Switch

Modify an Alert

Use the following steps to modify an existing threshold alert configuration.
1. Select Threshold Alerts from the Configure menu.
2. Select the alert that you want to modify by clicking the alert information in the
3. If the alert is active, select Deactivate, then select the alert information in the
4. Select Modify.
Note:
alert.
5. Select a threshold type from the drop-down list.
6. Select Next when you are done. A Modify Threshold screen appears where
7. Continue through the Modify Threshold screens until the summary screen
8. Perform either of the following steps:
130
The Configure Threshold Alerts dialog box displays.
table.
table again.
If the alert is active, an error message displays prompting you to deactivate the
An initial Modify Threshold screen appears where you can change the
threshold type.
you can change the % utilization, cumulative minutes for the threshold to
occur before notification, and the time interval for measuring throughput and
for alert notification.
appears displaying the alert configuration.
— If you need to change any parameters, select Previous and Next to
display the desired Modify Threshold screen.
— Select Finish when you are done.
Edge Switch 2/24 Product Manager User Guide