HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 22

Product Manager Overview
This manual provides details on the Product Manager application for the Edge
Switch 2/24 only. Use this manual for the Product Manager installed on an HAFM
server. This manual does not cover the Embedded Web Server interface or CLI.
20
The command line interface (CLI). The CLI allows you to access many
HAFM and Product Manager functions while entering commands during a
Telnet session with the switch. The primary purpose of the CLI is to automate
management of a large number of switches using scripts. The CLI is not an
interactive interface; no checking is done for pre-existing conditions and no
prompts display to guide users through tasks. Refer to the HP StorageWorks
CLI Reference Guide for Director and Edge Switches.
Management using simple network management protocol (SNMP). An
SNMP agent is implemented through the SDCM application that allows
administrators on SNMP management workstations to access switch
management information using any standard network management tool.
Administrators can assign internet protocol (IP) addresses and corresponding
community names for up to six SNMP workstations functioning as SNMP
trap message recipients.
Edge Switch 2/24 Product Manager User Guide