Track Vector - Garmin G1000H Pilot's Manual

The following range items are configurable on the airways menu:
Airway Type
Low Altitude Airway (LOW ALT AIRWAY)
High Altitude Airway (HI ALT AIRWAY)

TRACK VECTOR

The Navigation Map can display a track vector that is useful in minimizing track angle error. The track vector
is a solid light blue line segment extended to a predicted location. The track vector look-ahead time is selectable
(30 sec, 60 sec (default), 2 min, 5 min, 10 min, 20 min) and determines the length of the track vector. The track
vector shows up to 90 degrees of a turn for the 30 and 60 second time settings.
Displaying/removing the track vector:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group.
4) Press the ENT Key.
5) Highlight the 'TRACK VECTOR' field.
6) Select 'On' or 'Off'. Press the ENT Key to accept the selected option. The flashing cursor highlights the look
ahead time field. Use the FMS Knob to select the desired time. Press the ENT Key.
7) Press the FMS Knob to return to the Navigation Map Page.
190-01255-00 Rev. A
Table 5-4 Airway Range Information
Figure 5-24 Navigation Map -Track Vector
Garmin G1000H Pilot's Guide for the Bell 407GX
™
FLIGHT MANAGEMENT
Symbol Default
Range (nm)
200
300
Track Vector
Maximum
Range (nm)
500
500
159